77777.com_澳门金沙在线寓目_4166金沙登录
Product service
  • GOOT RX-802ASSoldering Station
    • 金沙2015手机版下载
    • 概述
    • 参数
    • 使用范畴
    • 资料
    • 相干产物
    • 视频

      Feature:

      1.     Excellent heat recovery

      Compact, high output heater (72W) combined with a high sensitivity sensor means there is almost no temperature fluctuation during heavy load continuous operation.

      2. Fastest in its class

      With the new slide-change tip there is no need for heat-resistant pads or tools when changing the tip. (PAT.P)

      3.  All-in-one tip design

      Heater and sensor included in the tip making maintenance and changing tips easy.

      4.  Anti-oxidation tip(PAT.)

      Tips designed with fine solder coated grooves to stop oxidation. (RX-80HRT-BM only)

      5.  Reduced heat-up of soldering unit grip

      Newly designed thermal insulation soldering unit construction (PAT.P) to reduce heat transfer to the grip.

      6.     Thick iron plating for lead-free soldering

      All tips with thick iron plating to prevent slow erosion caused by lead-free soldering.

      7.     High/Low Temperature Alarm

      An alarm sounds (to alert the user) when the temperature goes outside (above or below) the maximum or minimum temperature settings. High/low setting range 3¡ëC~100¡ëC.

      8.     Intelligent Sleep Function (PAT.)

      Automatically lowers the tip temperature when inactive for a preset period of time, preventing overheating. User definable preset time. (Can be used in conjunction with Shutdown function.)

      9.     Intelligent Sleep Function (PAT.)

      Automatically lowers the tip temperature when inactive for a preset period of time, preventing overheating. User definable preset time. (Can be used in conjunction with Shutdown function.)

      10.   Sleep Release Function (PAT.P)

      Sleep mode can be exited (at any time) by bringing the tip into contact with the wet sponge to cause temperature fluctuation. (Effective when temperature is set above 100°C)

      11.   Shutdown function

      The unit automatically shuts down when not used for a preset period of time. This means that the unit turns itself off, if you forget to!

      12.   Advanced Alarm Function (To prevent overheating)

      Alarm sounds if the iron is left in contact with the component longer than the specified/set time. This prevents inexperienced operators from overheating the component, and in turn helping quality control.

      13.   Calibration Function (PAT.)

      The calibration function digitally offsets the difference between the tip temperature and the temperature shown by a tip thermometer being used.

      14. New ergonomic design soldering unit

      New ergonomically designed soldering unit provides comfortable usability, easy handling and a shorter distance from grip to tip.

      15. Handpiece rubber grip (Anti-static)

      Four colours to differentiate between stations, tasks or types of solder being used.
      Note: Cannot be used with RX-802ASPH


      型号

      RX-802AS

      额定电压

      110,   120, 130, 220, 230, 240V AC

      耗电量

      80W

      电烙铁电压/功率

      24V   AC/72W

      温度设定范畴

      50—450℃

      尺寸

      Soldering   Unit

      全长158mm (除带地线插头)

      电烙铁部

      146(L)   X 115(W) X 98(H)mm

      重 量

      Soldering   Unit

      约28g (除电源线)

      电烙铁部

      约1.8kg (除电源线)

      泄电电压

      2Ω以下

      地线电阻

      Less   than 1Ω

      电烙铁至掌握部线长

      2Ω以下

      电源线长度

      1.2m 3芯、带地线插头

      附件

      电烙铁 ST-20、尺度焊嘴


    77777.com
    www.7249.com

      |    |  

    澳门金沙在线寓目
    Follow us:

    77777.com

    金沙2015手机版下载

    Copyright © 1999-2017 Hapoin Enterprise All Rights Reserved

    4166金沙登录